4.2.1. Chilled beam DK-LIG/Z, with ventilation function, two-sided discharge

For room cooling and heating in the commercial sector, trade and industry, for high cooling capacities and simultaneous fresh air supply to improve indoor air quality and humidity control. The secondary air is removed directly from the occupied zone. The supply air is discharged on two sides, which enabling different arrangements in room. This chilled beam is designed for integration into suspended ceilings made from metal, gypsum plasterboard, mineral fibres etc., or downstanding installation. Downstanding installation calls for additional lateral surfaces (so-called wings) to stabilize the supply air jet. These wings can be designed to accommodate veiling utilities, e.g. lighting, loudspeakers, etc.

Nominal width:

300 mm (for flush installation)
450 mm (downstanding)

Nominal height:

285 mm

Nominal length:

1 200, 1 500, 1 800, 2 100, 2 400, 2 700 and 3 000 mm

Supply air flow:

8 to 25 l/(s • m) [30 to 90 m³/(h · m)]

Surface finish:

powder coating to RAL (standard RAL 9010)

Connection type:

sleeve Rp ½, or calibrated pipe and suitable for push-in fitting, spigot DN 100 to DN 150